Collets/Chuck
Brand: TORK CRAFT
Quick change collet kit
The quick change collet allows you to fit the following collet diameters:
&O/; 0.8mm
&O/; 1.6mm
&O/; 2.4mm
&O/; 3.2mm
Make sure to tighten the collet nut with a collet wrench.....
R 77.90
Ex VAT:R 67.74
Brand: TORK CRAFT
Replacement collet - &O/; 0.8mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 0.8mm....
R 23.90
Ex VAT:R 20.78
Brand: TORK CRAFT
Replacement collet - &O/; 1.6mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 1.6mm....
R 23.90
Ex VAT:R 20.78
Brand: TORK CRAFT
Replacement collet - &O/; 3.2mm
The collet is used to hold mini rotary accessories with a shank diameter of &O/; 3.2mm....
R 23.90
Ex VAT:R 20.78
Brand: TORK CRAFT
Multi chuck - &O/; 0.8mm - 3.2mm
The multi chuck is ideal for mini & micro drill bits, to secure hold different diameter accessories from &O/; 0.8mm up to &O/; 3.2mm....
R 98.90
Ex VAT:R 86.00
Brand: TORK CRAFT
Collet wrench
The collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary accessory in place.
The back end of the wrench has a flat tip screwdriver that can be used to change accessories on the mini rotary m&rels.....
R 12.90
Ex VAT:R 11.22
Brand: TORK CRAFT
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;3.2mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also b..
R 35.90
Ex VAT:R 31.22
Brand: TORK CRAFT
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;2.3mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also b..
R 36.90
Ex VAT:R 32.09
Brand: TORK CRAFT
Flexible shaft for TCMT001 rotary tool
Collet diameter: &O/;1.6mm
Application:
The collet is measured on the inside. There are three different collet sizes
available. The collet size needs to correspond to the shaft diameter of the mini
tool being used.
A drill chuck (TCMT001DC) can also b..
R 35.90
Ex VAT:R 31.22
Brand: TORK CRAFT
Chuck for TCMT001 rotary tool
Application:
The chuck is used to replace the collet clamping system of the TCMT001 rotary
tool. The clamping range is &O/;0.3-3.2mm.
TCMT001 accessories:
TCMT001DC
Drill chuck 0-3.2mm
TCMT001FS
Flexible shaft
..
R 147.90
Ex VAT:R 128.61
Brand: PG
Collet set for thread 8 x 0.75
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
&O/; 1.00mm
&O/; 1.50mm
&O/; 2.35mm
&O/; 3.00mm
&O/; 3.20mm
Collet nut included for 8 x 0.75 thread....
R 241.90
Ex VAT:R 210.35
Brand: PG
Collet set for thread 9/32 x 40
The collet set is used to hold the corresponding shank diameter.
Collets included in the set:
&O/; 0.80mm
&O/; 2.35mm
&O/; 3.00mm
&O/; 3.20mm
Collet nut included for 9/32 x 40 thread....
R 206.90
Ex VAT:R 179.91
Brand: PG
Keyless chuck for thread 8 x 0.75
The keyless chuck is used to hold accessories with a shank diameter between &O/; 0.4-3.2mm.....
R 432.90
Ex VAT:R 376.43
Brand: PG
Keyless chuck for thread 9/32 x 40
The keyless chuck is used to hold accessories with a shank diameter between &O/; 0.4-3.2mm.....
R 450.90
Ex VAT:R 392.09
Showing 1 to 14 of 14 (1 Pages)